產品描述

MP 〇轉接模塊,主要用于將 MPO 主干光纜終端的 12 芯 MPO 連接器分支為單芯或雙芯的常規連接器利用單芯或雙芯跳線可以直接將模塊輸出端連接至系統設備輸出端口,、配線架端口或用戶端.此轉接模塊的特征是單芯或者雙芯端口在模塊前端,可選擇 12  口 SC 單工連接器及 12  口 LC 雙工連接器 ,背部安裝一個或兩個適配器.模塊為轉接跳線,直接連接模塊的前面板與背部適配器.

MPO switching module, mainly used for the MPO trunk cable terminal of the 12 core MPO connector
branch for a single core or dual core of the conventional connector. The use of single core or dual core
patch can be directly to the output end of the module is connected with the system to the output port of
the device, distributing frame port or the client.
Characteristics of the switching module is a single core and double core port at the front end of the
module, can choose 12 SC -x connector and 12 LC duplex connector, back to install one or two

adapters. Transfer module for the jumper, the front panel and the back adapter connection module.

產品應用

將 12 芯 MTP 連接器分支轉換到 LC ,、 MTRJ 雙工連接器或 SC 連接器.
低損耗連接,提供了系統設計靈活性.
前面板裝配 LC 、 MTRJ 或 SC 適配器,后面板裝配 MPO 適配器.
采用優質工程塑料與鋁合金材料,表面靜電噴塑,外形美觀,方便使用.
MPO 面板可輕松的升級.
所有端口前端均有標號,容易辨識.
方便快捷的安裝,、配置靈活、便于管理.
Switch 12 core MTP connector to LC, MTRJ duplex connector or SC connector.
Low loss connection provides system design flexibility.
Front panel assembly LC, MTRJ or SC adapter, rear panel assembly MPO adapter.
The quality of engineering plastics and Aluminum Alloy materials, su-ce electrostatic spray, beautiful appearance,
convenient use.
MPO panel can be easily upgraded.
All ports are labeLED, easy to identify.
Convenient and quick installation, flexible configuration, easy to manage.